Products
Home

Cast Steel Gate Valve

  • Ball Valves
  • Customized Valves
  • Others
  • Plastic Valves
  • Gate Valves
  • Globe Valves
  • Check Valves
  • Butterfly Valves
  • Plug Valves
  • Special Alloy Valve
  • Control Valves
  • Strainers
  • Actuator

GP280GH Gate Valve

This gate valve features a GP280GH (EN 1.0625) carbon steel cast body, a European standard material specified under EN 10213 for pressure equipment. GP280GH is a higher-strength weldable carbon steel casting grade, offering greater tensile and yield strength than GP240GH, making it suitable for higher pressure classes where standard WCB may be insufficient. The valve utilizes a wedge gate design for reliable on/off isolation of liquids, gases, and steam in industrial piping systems. The material is commonly cross-referenced with ASTM A216 WCC in terms of strength and weldability, though it is not an automatic substitute.
DESCRIPTION

NSV GP280GH Gate Valve

This gate valve features a GP280GH (EN 1.0625) carbon steel cast body, a European standard material specified under EN 10213 for pressure equipment. GP280GH is a higher-strength weldable carbon steel casting grade, offering greater tensile and yield strength than GP240GH, making it suitable for higher pressure classes where standard WCB may be insufficient. The valve utilizes a wedge gate design for reliable on/off isolation of liquids, gases, and steam in industrial piping systems. The material is commonly cross-referenced with ASTM A216 WCC in terms of strength and weldability, though it is not an automatic substitute.


Key Features


GP280GH Body: EN 10213 carbon steel casting (1.0625). Chemical composition: C 0.18–0.25%, Mn 0.80–1.20%, Si ≤0.60%. Tensile strength 480–640 MPa, yield strength ≥280 MPa, elongation ≥20%.

Higher Strength than GP240GH: With a minimum yield strength of 280 MPa, GP280GH is selected where the strength of GP240GH is insufficient, typically for higher pressure ratings or more demanding service.

Wedge Gate Design: Flexible or solid wedge available for tight shutoff and wear compensation.

Standard Compliance: Manufactured to EN 10213 for pressure purposes; valve design typically to API 600, DIN 3352, or EN standards as specified.

Material Cross-Reference: Approximately equivalent to ASTM A216 WCC and JIS SCPH2 in strength and weldability.

Temperature Range: Suitable for service from -29°C to approximately 450°C (depending on pressure class and application).




Typical Applications

Widely used in power generation, petrochemical plants, boiler feedwater systems, and industrial process piping where higher-strength carbon steel is required for elevated pressures or temperatures. Also applied in valve bodies for triple-offset valves and general pressure equipment.




FAQ

1. Q: What types of industrial valves does NSV manufacture?

A: NSV manufactures cast and forged steel industrial valves, including ball, gate, globe, check, butterfly, and plug valves. The product range also includes control, knife gate, corrosion-resistant, and other application-specific valve solutions. Availability depends on the product design and project requirements.

2. Q:How can I get your company catalog?

A: For your reference, basic catalogue is same as "Download>E-Catalog” of homepage. If you need printed material or request more specific data like PQ material, please contact sales team.

3. Q:Do you have any valve in stock?

A:There have a lot of GGC valves(2”&within) in stock,and that can delivery within one week.




Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@nsvvalve.com
or use the following enquiry form. Our sales representative will contact you soon. Thank you for your interest in our products.

Copyright © 2021 NSV Valve Corporation All Rights Reserved. | XML | Sitemaps